Jacking and Skidding for Heavy Equipment: How Industrial Machinery Is Moved and Positioned
Moving industrial machinery is not always a matter of placing equipment on a trailer and transporting it to another location. Some loads are too heavy, too large, or positioned in areas where conventional lifting and transportation methods are not practical.
Transformers, generators, industrial machinery, and other heavy equipment may need to be moved through restricted areas, inside industrial facilities, or across short distances where there is limited access for cranes and transport vehicles. In these situations, jacking and skidding can provide a controlled method for moving and positioning heavy loads.
Jacking raises the equipment from its existing position, while skidding moves the load horizontally along a prepared path. When used together, these methods allow heavy equipment to be lifted, shifted, aligned, and positioned with controlled movement.
Understanding how heavy equipment jacking and skidding works is important when planning an industrial equipment relocation project. The process involves more than hydraulic equipment. Load characteristics, ground conditions, equipment capacity, rigging, movement paths, and final positioning all need to be considered before the operation begins.
What Is Jacking and Skidding?
Jacking and skidding are specialized methods used to move and position heavy equipment when conventional lifting or transportation methods may not be suitable.
Jacking involves using hydraulic jacks or similar lifting equipment to raise a load. The equipment is lifted only as much as necessary to install supports, skidding equipment, or other components required for the next stage of the operation.
Skidding is the horizontal movement of the load along a prepared path. Depending on the project, hydraulic skidding systems can push or pull the equipment while controlling its movement and alignment.
The two methods can therefore work as part of the same operation. A typical process may involve:
Jacking → Supporting → Skidding → Positioning → Lowering
The exact sequence depends on the equipment, site conditions, movement distance, and final positioning requirements.
Unlike conventional equipment moving methods that may rely heavily on cranes or transport vehicles, jacking and skidding can allow extremely heavy loads to be moved while remaining close to ground level.
Why Is Jacking and Skidding Used for Heavy Equipment?
There are several situations where heavy equipment relocation requires more than conventional lifting or transportation.
A large piece of industrial equipment may be located inside a facility with limited crane access. There may not be enough space to position a mobile crane, or the building structure may restrict the use of lifting equipment.
In other cases, the load may be too heavy for practical crane handling at the required radius. A project may also require equipment to be moved only a short distance, such as from a delivery point to a foundation or installation location.
Jacking and skidding can be useful in situations involving:
- Extremely heavy industrial equipment
- Limited overhead clearance
- Restricted working areas
- Indoor machinery relocation
- Equipment positioned close to foundations
- Heavy loads that require precise final positioning
- Locations where crane access is limited
- Short-distance movement of heavy machinery
The method is particularly useful when the objective is not simply to transport a load but to position heavy equipment accurately at its final location.
How Hydraulic Jacking Works
Hydraulic jacking is used to raise heavy equipment in a controlled manner.
Hydraulic jacks generate lifting force through pressurized hydraulic fluid. Multiple jacks can be used together when a load requires significant capacity or when its weight needs to be distributed across several lifting points.
Before lifting begins, the team needs to understand the equipment’s weight, dimensions, center of gravity, and suitable lifting points. The supporting surface must also be capable of handling the forces generated during the operation.
The basic process can include:
- Positioning hydraulic jacks at designated lifting points.
- Checking the supporting surface and equipment arrangement.
- Raising the load in a controlled sequence.
- Monitoring the load for stability and alignment.
- Installing skidding equipment or temporary supports.
- Transferring the load onto the required support system.
The amount of lifting required depends on the equipment and skidding system. The objective is generally to raise the load only enough to safely install or engage the equipment required for horizontal movement.
Hydraulic jacking therefore requires careful coordination. Uneven lifting or uncontrolled movement can affect load stability and place excessive forces on equipment or supporting structures.
How Hydraulic Skidding Moves Heavy Loads
Once the equipment has been raised and properly supported, the next stage is horizontal movement.
A hydraulic skidding system typically uses skid beams, tracks, sliding surfaces, or other engineered components to provide a controlled path for the load. Hydraulic cylinders can then generate the force needed to move the equipment along that path.
The skidding system must be appropriate for the weight and configuration of the load. The path must also be prepared to support the expected forces throughout the movement.
Unlike simply pulling a heavy load with a conventional vehicle, hydraulic skidding allows movement to be controlled in small increments. This can be important when the equipment needs to pass through restricted areas or arrive at a precise final position.
During movement, the team may monitor:
- Load alignment
- Skidding speed
- Hydraulic pressure
- Support conditions
- Movement of the load
- Skid path condition
- Clearance from surrounding structures
The equipment can then be advanced progressively until it reaches the required location.
Equipment Used for Jacking and Skidding
A jacking and skidding operation may require several types of equipment working together. The exact configuration depends on the load and site.
Hydraulic Jacks
Hydraulic jacks provide the lifting force needed to raise the equipment. Multiple jacks may be used when the load is large or when controlled lifting at several points is required.
Skidding Systems
Skidding systems provide the mechanism for horizontal movement. Hydraulic systems can control the movement of heavy equipment along prepared skid paths.
Skid Beams and Tracks
Skid beams or tracks provide a stable movement surface for the load. Their configuration depends on the equipment weight, dimensions, and required travel path.
Hydraulic Power Units
Hydraulic power units provide the pressure required to operate hydraulic jacks and skidding equipment. The system needs to provide sufficient capacity for the planned operation.
Rigging Equipment
Rigging equipment may be required during lifting, positioning, securing, or connecting the load to the movement system. Depending on the operation, this can include slings, shackles, lifting accessories, and other components.
Temporary Supports
Temporary supports, cribbing, or other structural arrangements may be used while transferring the load between different support systems.
Equipment selection should always be based on the actual load and operating conditions rather than equipment capacity alone.
Planning a Heavy Equipment Relocation
A successful industrial equipment relocation begins with planning.
Before equipment is moved, the project team needs accurate information about the load. This includes its weight, dimensions, center of gravity, configuration, lifting points, and support requirements.
Load Weight and Dimensions
Accurate weight information helps determine the capacity required for the jacking and skidding system. Dimensions also affect the movement path and available clearance.
Center of Gravity
The center of gravity is particularly important for large or irregularly shaped machinery. Understanding how the weight is distributed helps determine suitable lifting points and supports.
Ground and Foundation Conditions
The surface supporting the equipment and movement system needs to be assessed before the operation. Ground or structural conditions can affect the stability of jacks, skid beams, and temporary supports.
For indoor operations, the structural capacity of floors and foundations may need to be considered. For outdoor operations, ground conditions and load distribution can become important factors.
Movement Path
The skidding path should be assessed before movement begins. The team needs to understand the distance, available clearance, changes in elevation, obstacles, and other conditions that could affect the operation.
Final Position
The final position should also be established during the planning stage.
Some equipment needs to be aligned with foundations, anchor bolts, connection points, or other installation requirements. This means the operation may require precise positioning rather than simply moving the equipment from one point to another.
The Role of Rigging in Jacking and Skidding
Although jacking and skidding primarily involve vertical and horizontal movement, lifting and rigging can remain an important part of the overall operation.
Rigging may be required to connect lifting equipment to the load, stabilize components, assist with positioning, or support other stages of the relocation.
The rigging arrangement needs to consider the load’s weight, shape, lifting points, and center of gravity. Equipment should be inspected and selected according to the requirements of the operation.
Coordination between the rigging team and the personnel operating the hydraulic systems is also important. Everyone involved needs to understand the planned sequence and communicate throughout the movement.
This is particularly important when working around large equipment where visibility can be limited.
Jacking and Skidding vs. Conventional Equipment Moving
Not every heavy equipment relocation project requires jacking and skidding.
Cranes may be appropriate when the equipment can be safely lifted and there is sufficient space for crane positioning. Specialized trailers may be suitable when the equipment needs to travel over a significant distance.
Jacking and skidding becomes more relevant when the challenge is controlled movement and positioning in a restricted area.
For example, an industrial transformer may arrive near a facility but still need to be moved to its foundation. A crane may not be practical because of overhead restrictions, limited working space, or the weight of the transformer.
In such a case, hydraulic jacking can raise the transformer enough to install the required skidding system. The equipment can then be moved horizontally until it reaches the required position.
The appropriate method depends on the project. Heavy equipment moving should be planned around the load, site, access conditions, and final positioning requirements rather than relying on one method for every situation.
Common Applications for Jacking and Skidding
Jacking and skidding can be used across different industrial environments where large equipment needs to be relocated or precisely positioned.
Common applications include:
Transformers
Large power transformers can require specialized handling because of their weight, dimensions, and positioning requirements. Jacking and skidding may be used to move a transformer from a delivery area toward its foundation.
Generators
Industrial generators and other power-generation equipment may need to be positioned within facilities where access for conventional lifting equipment is limited.
Industrial Machinery
Manufacturing and processing facilities may need to relocate large machinery during installation, expansion, maintenance, or plant modification projects.
Heavy Mechanical Equipment
Large compressors, turbines, presses, and other mechanical equipment may also require controlled movement and positioning.
The specific method depends on the equipment and site, but the principle remains the same: the load must be moved in a controlled manner while maintaining stability and protecting the surrounding environment.
Safety Considerations for Jacking and Skidding
Safety needs to be incorporated into every stage of a heavy equipment moving operation.
The load should be properly assessed before equipment is selected. Hydraulic equipment, rigging components, supports, and other systems should be appropriate for the planned loads and operating conditions.
Important considerations include:
- Load weight and center of gravity
- Jack capacity and configuration
- Skidding system capacity
- Ground or structural conditions
- Load stability
- Skidding path
- Equipment inspection
- Personnel positioning
- Communication procedures
- Clearance from surrounding structures
- Emergency procedures
Personnel should remain clear of potential pinch points and areas where uncontrolled movement could create hazards.
Hydraulic systems should also be monitored throughout the operation. Changes in pressure, load position, alignment, or support conditions can indicate that the operation needs to be stopped and reassessed.
A controlled operation depends not only on equipment capacity but also on planning, communication, supervision, and disciplined execution.
What to Consider Before a Jacking and Skidding Project
Before beginning a jacking and skidding operation, several questions should be addressed.
How heavy is the equipment?
Accurate load information determines the required capacity of the lifting and skidding systems.
What are the equipment dimensions?
Length, width, and height affect the movement path and available clearance.
Where is the center of gravity?
This helps determine suitable lifting and support points.
What is the condition of the supporting surface?
Ground, floor, foundation, and structural capacity may need to be evaluated.
How far does the equipment need to move?
The movement distance affects the skidding system and path requirements.
Are there obstacles or clearance restrictions?
Columns, walls, doorways, overhead structures, and other obstacles can affect the operation.
Where does the equipment need to end up?
Final positioning requirements can determine how accurately the load needs to be moved and aligned.
What other activities are involved?
The operation may also require rigging, lifting, transportation, site preparation, or final installation.
Answering these questions before mobilization helps the project team establish an appropriate method and identify potential challenges early.
Moving Heavy Equipment With Greater Control
Jacking and skidding provide a practical method for moving and positioning heavy industrial equipment when conventional handling methods may not be suitable.
The process combines controlled hydraulic lifting with controlled horizontal movement. Rather than relying solely on a crane or transport vehicle, the equipment can be raised, supported, moved, aligned, and positioned through a carefully planned sequence.
However, the method is not simply about having powerful hydraulic equipment. Successful heavy equipment relocation depends on understanding the load, assessing the site, selecting suitable equipment, preparing the movement path, coordinating rigging activities, and maintaining control throughout the operation.
For transformers, generators, industrial machinery, and other heavy loads, these considerations can make a significant difference in how safely and efficiently the equipment is positioned.
The right moving method ultimately depends on the equipment, the site, the available access, and the final positioning requirements. When these factors are assessed properly, jacking and skidding can provide a controlled solution for complex industrial equipment relocation projects.
Frequently Asked Questions
What is jacking and skidding?
Jacking and skidding is a method of moving heavy equipment using hydraulic lifting and horizontal movement systems. Hydraulic jacks raise the load, while a skidding system moves it along a prepared path.
When is jacking and skidding used?
Jacking and skidding is commonly used when heavy equipment needs to be moved or positioned in areas with limited crane access, restricted working space, low overhead clearance, or challenging site conditions.
What equipment is used for jacking and skidding?
Equipment can include hydraulic jacks, hydraulic skidding systems, skid beams or tracks, hydraulic power units, rigging equipment, temporary supports, and other components selected according to the load and site requirements.
What types of equipment can be moved using jacking and skidding?
The method can be used for heavy industrial equipment such as transformers, generators, turbines, large machinery, compressors, and other equipment requiring controlled relocation or positioning.
Is jacking and skidding the same as heavy lifting?
No. Jacking primarily involves raising a load, while skidding involves moving it horizontally. A complete operation may use both methods together with lifting and rigging equipment.
What needs to be considered before a jacking and skidding operation?
Important considerations include load weight, dimensions, center of gravity, lifting points, supporting surface, skidding path, equipment capacity, site access, surrounding obstacles, safety controls, and final positioning requirements.
Planning to Move Heavy Equipment?
If you’re preparing to relocate or position a transformer, generator, industrial machine, or other heavy equipment, the right moving method can make a significant difference. From hydraulic jacking and skidding to rigging and final positioning, every part of the operation needs to be considered before the move begins.
Have a heavy equipment transport project in mind? Talk to our team and discuss the requirements of your upcoming move.